Tuesday, April 25, 2017

Pardee UNC Health Care to host nursing job fair - May 4th


Pardee UNC Health Care will host a nursing job fair on Thursday, May 4 from 8 to 11 a.m. and from 4 to 7 p.m. The job fair will take place in the hospital’s orientation room, located at 800 N. Justice St. in Hendersonville. Pardee is offering sign-on bonuses of up to $10,000 for registered nurses and up to $1,000 for nursing assistants. Interviews will be held onsite. For more information, please contact Pardee Human Resources at 828-696-4209.


Pardee UNC Health Care is a not-for-profit community hospital founded in 1953 and is managed by UNC Health Care. The hospital is licensed for 222 acute care beds. Pardee has several locations separate from the main campus, including a comprehensive physician practice network, two urgent care locations and five orthopedic clinics. For more information or to find a physician, visit www.pardeehospital.org.

NC Stage Company to present "Matt & Ben"


North Carolina Stage Company (NC Stage) is pleased to present Matt & Ben written by Mindy Kaling and Brenda Withers.
 
The play first premiered in 2003, starring the authors and actresses Mindy Kaling and Brenda Withers. Written to be performed by two actresses (the playwrights originated the title roles), Matt & Ben purports to depict the relationship between Matt Damon and Ben Affleck in 1995, when the two were struggling actors. The play’s absurdist premise has the “Good Will Hunting” screenplay — for which Damon and Affleck, in real life, won an Oscar — dropping from the sky, flummoxing the buddies. In reality the screenplay might not have appeared right out of thin air, but the play takes audiences through a fantastic journey of what if it did. Matt and Ben spend one long Saturday in Somerville fighting, reminiscing, and hallucinating a lot more than normal when confronted with the screenplay they already know will change their lives. Matt & Ben is one wicked funny show that will make an audience feel like they're right in the same living room as these young Boston boys (played by girls).

The writers: Mindy Kaling is an actress, comedian, writer and producer. She is a New York Times best-selling author and can be seen on her primtime televsion show, The Mindy Project (Fox), in which she not only stars, but also created, writes, and executive-produces. Ms. Kaling was most recently seen on the eighth season of The Office (NBC), in which she starred as “Kelly Kapoor.” 

Brenda Withers is a writer and actor. She is a founder of both the Harbor Stage Company (Hedda Gabler, CHURCH) and Lucid Theater (My Heart Split in Two, The Macguffin?), the co-writer of Matt & Ben (PS 122), and a former playwriting fellow of the Camargo Foundation in Cassis, France.

The actors: Anne Thibault (Matt) has worked professionally as an actress, playwright, and director for over twenty years.  She toured with the National Shakespeare Company for three years as Lady M and Lady Capulet, among others.  Other regional credits include acting work at the North Carolina Stage Company (Jane/THIS, Maureen/The Beauty Queen of Leenane, Catherine/Proof, Fay/Loot, and the one woman show The Syringa Tree), as well as several seasons at the Fairbanks Shakespeare Theatre. Other regional work includes the White River Theatre Festival, the Theatre at Monmouth, the Clarence Brown Theatre, the Fulton Opera House, the Boston Peabody and more.  Internationally she has performed at the Salzburg Seminar, Castello de Sannicandro di Bari, AKT-ZENT in Berlin and at the GITIS School is Moscow. In New York, she has appeared off-Broadway in The Seagull, the New York International Fringe Festival, and in several plays by Noah Haidle at HERE.  Work in television and film include the independent film Waterville, Comedy Central's Strangers with Candy, and Signe Bauman's Birth.

Laura Rikard (Ben) is a stage and film actress as well as director, acting coach, stage moment specialist, devised theatre artist and public speaking consultant. After graduating from the College of Charleston with a BA in theatre, she moved to New York where she worked in theatre and continued her training with the Actor’s Studio. In New York she worked at LaMAMA, ETC, New Perspectives Theatre and appeared at Carnegie Hall. She also lived and performed in Europe.  She studied Commedia dell’Arte with master teachers Antionio Fava and Carlos Garcia, physical theatre in Denmark with Odin Teatret, and received a Master of Arts from Paul McCartney’s Liverpool Institute for Performing Arts where she performed onstage with Sir Paul McCartney.  After her work in Europe she attended the University of Virginia where she received her Master of Fine Arts in Acting.  She has performed in film, television, commercials and regional theatre.

Matt & Ben was the Winner of the 2002 New York International Fringe Festival, Best Overall Production.

“Absolutely delightful and deliciously spiteful! Sharp and clever, Matt & Ben succeeds!” – The New York Times

“A hit! Acidic, funny and affectionate! Matt & Ben spoofs Hollywood’s best friendship!” – The New York Post

Matt & Ben
Where: North Carolina Stage Company, 15 Stage Lane in downtown Asheville NC 28801
Dates: May 17, 2017 through June 11, 2017.
Times: Wednesday-Saturdays at 7:30 PM, Sundays at 2:00 PM, and Select Saturdays at 2:00 PM
Ticket Prices: See website for current ticket prices.
 
Tickets are available by calling 828-239-0263 or visiting us online at ncstage.org

Immediate job openings listed by Friday Staffing







Job Description/Requirements
Location
Pay Rate
Laborer (93030)
Loading and Unloading Tires from Trucks
Hanging tires on hooks that take them up into racks to then be put on shelves into stock.
Great attendance required
Will also help in shipping and pulling of orders.
 
Flat Rock, NC
$10.50/hr
1st Shift
Mon - Friday
Temp to hire
Manual Milling/Lathe (93168)
Machine Shop-Seeking candidates with experience in the operation of Manual Mills and Lathes as well as grinders, buffers, drill presses etc. TIG welding experience is a plus. We are looking for someone who likes to learn and would like to grow and advance long term.
Weaverville, NC
$14.00/hr
Machine Operator (93243)
A high school diploma or equivalent. Forklift certification. Six months manufacturing experience. Must be proficient in mathematics.
Hendersonville, NC
$15.60/hr
3rd Shift
Temp to hire
Assembly (93249)
Assemble, test and pack lightweight product.
Attention to detail
Previous assembly experience required.
Self-motivated employees only
Flat Rock, NC
$11.00/hr
2nd Shift
Mon - Fri
Press Operator (93423)
Fast paced environment where attendance is crucial for success.
Safely and properly operate crane(s) .
Properly use calibers and micrometers to measure parts; mechanically inclined
Install and remove tooling package.
Measure and visually inspect parts during production
Close attention to detail is a must!
Fletcher, NC
$12.50/hr
3rd Shift
Mon - Fri
Grinding (93474)
Using table top grinder on metal parts. Must be FAST and self-motivated.
VERY Repetitive and requires good hand eye coordination.
Excellent attendance is required.
Fletcher, NC
$10.85/hr
1st Shift
Mon – Fri
10 hr shifts
Restoration Tech (93511)
Local company looking for a restoration tech who can work 8am,-5pm but who is flexible for emergency and on call shifts. Construction background is helpful but not required who can deal with customers. Also need to be able to read a tape measure and work with power tools.
West Asheville, NC
$11.00/hr
1st Shift
Temp to hire
Machine Operator (93535)
Candidates are required to have knowledge and be able to follow safe practices when operating the below equipment within the mill.
• Micrometer
• Wire Welder Machine– fuse/butt welding
• Small hand tools
• Interact with production software
• Operate hoists, pulleys and guides
Hendersonville, NC
$13.50/hr
Injection Mold Machine Operator (93539)
1ST, 2ND, 3RD, AND 12 HOUR SHIFTS AVAILABLE-NO GED/DIPLOMA REQUIRED
Operate injection molding machines in productive and safe manner.
Manufacture plastic parts in accordance to specifications.
Package plastic parts following manufacturing instructions.
Accurately inspect manufactured parts.
Use proper trimming techniques.
Arden, NC
$9.05/hr
All shifts
Administrative Assistant (93636)
Must have Word, Excel and QuickBooks
Will be answering calls, scheduling, paperwork, customer service, keep up with hour logs, job tracking, and hour logs.
Must be proficient with invoicing, QuickBooks and be a quick learner.
Most importantly: multi-task, organized, quick learner and strong customer service background
Asheville, NC
$11.00/hr
Broach Operator (93642)
1st & 2nd shifts available - $0.50 shift differential
Great attendance required
Produces machined parts per specifications and operating a computer numerical control (CNC) machine. Operator is also responsible for maintaining quality and safety standards; maintaining appropriate records, as well as maintaining equipment and supplies.
Arden, NC
$12.00/hr
1st & 2nd Shift
Mon – Fri
Temp to hire
Sales (93649)
Services existing accounts, obtains orders, and establishes new accounts by planning and organizing daily work schedule to call on existing or potential sales outlets and other trade factors.
Reach out to customer leads through cold calling
West Asheville, NC
Salary + Commission
Visual Inspector (93678)
M-F 3rd shift (Train on a different shift for 2 weeks)
In a darkened environment, load parts in a fixture, and start cycle. Then inspect part visually under fluorescent light for cracks and other defects.
Self-motivated employee's only.
Great attendance required.
Arden, NC
$13.00/hr
3rd Shift
Temp to hire
Assembly Operator (93684)
Assemble, test, and pack foundation brake components at specified rates.
Assist in troubleshooting process problems.
Inspect and rework parts as required.
Fletcher, NC
$12-$13.40/hr
Forklift Drivers/Material Handlers (93688)
Receive, ship, handle, store and issue material according to established Company procedures.
Operate material handling equipment safely to perform assigned tasks.
Utilize approved computer systems, to insure that accurate inventory transactions are made.
Mills River, NC
$12-$13.40/hr Temp to hire
Order Packer (93705)
1st shift; 10:00-6:30
Packaging products for outbound orders while standing at a workstation.
Great attendance is required
Motivated employee's only
Flat Rock, NC
$10.50/hr
1st Shift
Mon – Fri
Temp to hire
Order Puller (93709)
Selecting parts for outbound orders with hand held scanners.
There is no sedentary/sit down work included with these positions.
Strong work ethic and great attendance required .
Flat Rock, NC
$10.50/hr
1st Shift
Mon – Fri
Temp to hir
Machine Operator (93712)
GED/Diploma Required, show stability in work history with positive references, Machine Operator experience, must be able to lift/carry up to 50lbs.
Fletcher, NC
$13.50/hr
Electronics Technician/Assembler (93714)
Local manufacturer seeks Electronics Technician/Assembler for microprocessor based temperature measurement devices.
Education/Experience: AAS in Electronics Technology or related field. Experience in a product testing environment is desired but NOT required. Will train the right individual.
Woodfin, NC
$12-$16/hr DOE
Sorter (93727)
1st shift (5am-3:30pm) Mon-Fri (Possible overtime)
Sorting/inspecting small metal car parts
Great attendance is required- reliable employee's only
Fletcher, NC
$10.85/hr
1st Shift
Mon - Fri
Assembler (93739)
Automotive company is seeking an experienced assembler. Temp to hire, must have assembly experience.
Fletcher, NC
$11.00/hr